Edgebanders

PLC Control Quick Heat-Up Glue System
Front & Rear End Trimming with 2 motors on star linear guides
Top & Bottom Trim Units w/tilting
2nd set of Top & Bottom Trim Unit
Top & Bottom Scraping Unit for smoothing
3mm pvc Hot air Blower to rejuvenate color
Top & Bottom Buffing Units
Min. Panel Thickness 10mm, Max. Panel Thickness 45mm
Min. Banding Thickness 0.4mm, Max. Banding Thickness 8mm
Min. Panel Length 140mm, Min. Panel Width 50mm
Feed Speed 10m./min
Electrics: 220V, 3Phase, 2004 machine

Cartridge glue system w/digital glue height indicator
3/16" (5 mm) edge thickness cap.
6 - 45 mm Panel thickness
60 mm min. Panel width
180 mm Min. length. 3 mm PVC Pneumatic guillotine for coil cutoff
Automatic feed magazine
2-Roller pressure section w/electronically controlled and feed speed synchronized drive roll
Double motor end trim (0.3 HP - 9,000 RPM HF motors), chamfers 0° - 15°
"1942-M" Top & bottom flush, fine & radius trim (0.9 HP - 18,000 RPM HF motors), bevels from 0° - 15°,
for simultaneous bevel & profile trimming, up to 3 mm radius.
Top & bottom cloth wheel buffing unit
Feed speed of 36 FPM with 1 HP feed drive.
Year 2000

Quick melt glue system with hopper
7- roll pneumatic pressure section,
Station:
Two motor end trim
Top and bottom trim station
Top and bottom bevel trimming with pneumatic control,
2 open stations
Oscillating buffing
Includes HOMATIC NC21 control.
Max wood strip capacity: 20mm
Feed speed: 52-75 ft/min infinitely adjustable
1999 machine/ SN: 0200-08-3715 480v 3ph

New & Used Woodworking Machinery/Tooling & Supplies/Leasing/Appraisals
Used Equipment Bought & Sold
Phone: 508 303-0600 Fax: 508 303-0602 email: sales@alliancemachinery.com

220/440v; 3ph; 60hz.
Workstations: Double motor end trim, chamfers 0 - 10, 0.22 kW - 9,000 RPM motor ea.;
universal top & bottom fine trim (1942M), for bevels from 0ø - 15ø; it allows simultaneous bevel
& profile trimming, 1 HP - 22,000 RPM motor ea. (trim motors are 0.6 kW HF - 300 Cy).
Top & bottom PVC scraper unit (1929) for 0.8 - 5 mm radius; top & bottom buffing (1940),
0.3 HP - 1,620 RPM ea. Cartridge glue system, 8 mm edge thickness cap., automatic magazine coil & strips (1903), 3 mm PVC cap. pneumatic guillotine for coil cutoff. Feed speed 35 FPM.
- Programable Logic Control for easy setup & program storage; PCS (Pneumatic Changeover
System) on trim stations. Complete with: Fixed outboard panel support, frequency converter,
sound enclosure, and used tooling.